Sanyo VCC-WB4000P - Manual (Page 37)

Alarm Settings
Description of the ALARM SET Screen
☞ Click the [ALARM] menu select button.
The ALARM SET screen is displayed.
You can use this screen to set external sensor alarms and motion detector alarms.
1 ALARM REC USE
This function sets whether the alarm functions
are to be used or not. Even if you wish to use the
alarm functions, first change this setting to “NO
USE” before making any other settings. Then
after making the required alarm settings, be sure
to change this setting back to “USE”.
2 EXTERNAL ALARM
Select the detection method for the sensors
when alarms are detected using external
sensors.
3 MOTION DETECTOR
When set to “ON”, the MOTION DETECTOR
SET screen is displayed. Sensor marks (
ú ) are
used to set the detection area in this setting
screen.
4 MOTION DETECTOR LEVEL
This sets the sensitivity level for the sensor
marks (
ú ). See p. 41 for details on the sensitivity
level.
1
2
3
4
5
6
7
8
9
F
G
H
ALARM BUFFERING SET screen (p. 45)
ALARM SET screen
ALARM NOTICE (SMTP) SET screen (p. 48)
MOTION DETECTOR SET screen (p. 40)
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
– 36 – English