Sanyo VCC-WB4000P - Manual (Page 30)

CAMERA Settings
4
CAMERA Adjustment
Select automatic iris or electronic iris.
Note: The electronic iris does not have an electronic shutter setting.
Click the and buttons repeatedly to adjust the iris level.
Note: The larger the setting is, the wider the iris is.
This lets you set the image brightness to one of five settings.
Setting range: 1 to 5 (default setting: 3)
Note: The larger the setting is, the brighter the images are.
This setting is used when IRIS is set to automatic iris.
Setting range: 1/60, 1/100 (default setting), 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
Available settings:
•
OFF (default setting): Backlight compensation is not carried out.
•
MULTI (multiple point photometry): Backlight compensation is
calculated from the whole image to obtain correct images.
•
CENTER (center focus photometry): Backlight compensation is
calculated based on the center of the image to obtain correct
images.
Available settings:
•
AUTO (automatic white balance)(default setting): The white
balance is adjusted automatically to obtain correct colors even if
the light source changes.
•
INDOOR: This setting is for when the camera is being used
indoors under fluorescent lighting.
•
OUTDOOR: This setting is for when the camera is being used
outdoors under natural sunlight.
•
MANUAL (manual white balance): This lets you make manual
fine adjustments to the white balance. When “MANUAL” is
selected, you can adjust the red and blue colors. It can be used
when the “AUTO” setting does not give correct color reproduction.
☞ Setting manual white balance (MANUAL)
Click the and buttons repeatedly to adjust the settings for R
(red) and B (blue).
Setting range: 0 to 255
Note: The red or blue component becomes stronger when the
setting is higher.
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
English – 29 –