Sanyo VCC-WB4000P - Manual (Page 61)

WIRELESS LAN SET Settings
Camera Wireless LAN Settings
Click the [WIRELESS LAN] menu select button.
The WIRELESS LAN SET screen will be displayed.
1
Make these settings after steps 1 and 2 on
page 59 have been completed.
The WIRELESS LAN SET screen will be
displayed.
2
Select “USE” from the [WIRELESS LAN
USE] drop-down list box.
If the wireless LAN card has been inserted,
the items marked with
✱ will automatically
show details for the inserted card.
3
Type in the same ESS ID that was set for
the wireless LAN device.
The ESS ID can consist of up to 32
alphanumeric characters.
4
Set the encipherment method.
Because the camera and the wireless LAN
device communicate by means of radio
waves, there is the possibility that wireless
packets could be intercepted and decoded by
outsiders. It is recommended that you
complete the encipherment setting in order to
provide greater security. (p. 61)
5
Make the TCP/IP settings.
Obtain the IP address and other information
from your network systems administrator.
6
Click the [SET] button and then turn off
the power.
Now make the settings in step 4 (Wireless
LAN device settings). (p. 59)
2
✱
✱
3
4
5
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
– 60 – English