Siemens SpeedStream 6500 Series User Manual
Page 61
6500 Series Residential Gateway User’s Guide
Configuring Advanced Features
5.
Select one of the following Powerline Filter options:
• Enable
Enables powerline filtering.
• Disable
Disables powerline filtering. If powerline filtering is disabled, all devices have access to the
Gateway.
6.
If powerline filtering is enabled, select one of the following Filter Mode options:
• Allow
Permits access to all the MAC addresses entered in the table.
• Deny
Restricts access to all the MAC addresses entered in the table.
7.
Type the MAC address in the MAC Address column next to each device you either want to permit
or restrict access.
8. Click
Next. This displays the “Powerline Remote Configuration” window.
Optionally configure a network password remotely on other powerline devices. To do this:
9.
Enter the password you want to assign to all powerline devices in Powerline Network Password.
10. Enter the current password in Device Password for the powerline devices you want to change.
11. Click
Next. This displays the Wizard “Finish” window.
12. Click
Reboot to save the settings.
56