Siemens SpeedStream 6500 Series - Manual (Page 32)

6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup
Toolbar
The Gateway has three primary toolbar buttons: Users, Devices, and Gateway. The options for all the
toolbar buttons differ depending on the user login. The administrator has the most authority with all
options enabled, while the user has limited options based on the user profile for the login. Please see the
table below for more information.
Users Button: This button provides access to user profiles and the User Profile
Wizard. This wizard guides you through the steps required to set up and configure
individual user profiles. Once configured, you can use this option to view a user’s
profile.
Devices Button: This button provides Access to network devices connected to the
Gateway. You can use this option to view shared files and resources on other
computers if they are shared via Windows File Sharing.
Gateway Button: This button provides access to all Gateway configuration options,
security settings, Gateway health monitoring, and Internet connection and network
details. The settings available may differ depending upon your service provider.
Logging into the Gateway
There are two types of primary users that log into the Gateway: administrators and users. Administrators
have rights to all of the configuration options available on the Gateway. Users have limited access based
on what is set by the administrator for each user.
To log on to the Gateway:
1. Select a user from the Log In drop-down menu in the upper-left
corner of the “Home” window.
2. Select a user from the Username drop-down menu.
3. Type the user password in Password.
4. Click Go. This displays the “Home” window.
Logging out of the Gateway
To log out of the Gateway:
1. Click GO next to Log Out. The system responds by displaying the
“Home” window.
27