Siemens SpeedStream 6500 Series - Manual (Page 25)

6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup
6. Click Next. This displays the “Configure Time Zone” window.
Optionally set the time zone of the area of the world in which you live on the “Configure Time Zone”
window. This option must be enabled to define time of day restrictions for users.
7. To set the time zone, select the Yes option for Enable Time Client.
8. Select your time zone from the Select Time Zone drop-down menu, then click Next. This displays
the “Wireless Setup Configuration” window.
Optionally set up wireless clients on your Gateway from the “Wireless Setup Configuration” window.
9. To setup wireless clients, select one of the following Wireless Interface options:
• Select Enable to enable a wireless connection for your computer.
• Select Disable if you do not wish to configure the Gateway for wireless, then click Next. This
displays the “Finish” window.
10. If you selected Enable, enter your wireless network ID in SSID (Service Set Identifier). This value is
the name of your network and must be identical to that defined for all the wireless client devices
connected to your network.
11. Optionally select a channel from the Channel drop-down menu. The channel is a path of
communication to use across your network. The selected channel must be identical to that defined
for all the wireless client devices connected to your network. Depending on your area and Gateway
configuration, the channel may default to only one value.
12. Click Next. This displays the “Wireless Security Configuration” window.
20