Sundance Spas 880 - Manual (Page 76)

Page 70
880 SERIES
22.9 Intelli-Sound Stereo Troubleshooting
1. Unit will not turn-on
Make sure spa power is turned on, then check both harness fuses on
side of unit making sure they are the proper ratings:
• Yellow memory B+ line (1A fuse); Red ACC line (10A fuse).
• When faced with a malfunction during operation, push BND
button (8) and Eject button (13) at the same time to reset
software.
• With spa power off, use a paperclip to press the reset button
located besides the USB Docking Station (10) to do a hardware
reset.
Note: It will be necessary to re-enter the radio preset memories and
other personal settings after performing a reset. After resetting player,
always ensure all functions are operation correctly.
2. Fogged CDs and Lens
This condition may occur when it’s cold. Wipe fogged CDs with a soft
cloth. Fogged optical components inside the unit will return to normal
operation after an hour in a heated environment.
22.10 Intelli-Sound Stereo Specifications
Tuner
FM usable sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10dB
FM 50dB quieting sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25dB
FM alternate channel selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80dB
FM stereo separation @ 1kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30dB
AM usable sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35dB
CD Player
Sampling frequency (8X oversampling) . . . . . . . . . . . . . . . . . . . . 44.1kHz
Channel separation @ 1kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50dB
Signal-to-noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60dB
Frequency-to-noise response @ +/-2dB . . . . . . . . . . . . . . . . . . 20-20kHz
Audio
Maximum power output . . . . . . . . (25 watts x 4 channel, 4Ω, 1kHz)100W
Continuous power . . . . . . . . . . . . . . 13 watts X 4, 4ohms,THD=1%,1kHz
Bass boost/cu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Hz +/- 10dB
Treble boost/cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10kHz +/-10dB
General
Nominal power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4 VDC
Allowable power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.8-15.6 VDC
Current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <15mA