Sundance Spas 880 - Manual (Page 35)

Page 29
880 SERIES
10.8 Air Controls
Each jet system has its own air control. These controls allow
you to regulate the amount of air which is mixed with the water
entering through the jets. Clockwise rotation adds more air and
counterclockwise rotation reduces air flow.
Note: To minimize heat loss, close all air controls when spa is not in use.
Certain jets may not draw air while either jets pump is running in low
speed; this is considered normal.
10.9 Waterfall Control
Turn waterfall control valve counterclockwise to increase
waterfall(s) output. Turn control valve clockwise to decrease
or turn off waterfall(s) output.
Note: It takes 2 full revolutions to change the waterfall from
a full off to a full on flow rate.
10.10 Fragrance Dispenser
On the rim of your hot tub is a screw-off cap labeled “SunScents
™
Fragrance Dispenser” (Pages 23-25). It is designed to contain packages of
a specially made fragrance available from your Sundance Spas dealer. The
fragrance is carried into the hot tub water by the air coming through the
injector system when the air blower is on.
CAUTION: To prevent personal injury, always turn off
air blower before removing or installing SunScents
dispenser cap. Use only Sundance SunScents
fragrances in your new hot tub. Never remove the
SunScents beads from their plastic cage for any reason!
Install bead cage directly into SunScents dispenser.
Never use this dispenser for any other type of fragrance.
Always make certain that the dispenser cap is securely in
place before operating the hot tub’s air blower.
Full
On
Full
OFF
2x
2x
Full
On
Full
OFF
2x
2x