Sundance Spas 880 - Manual (Page 21)

Page 15
880 SERIES
7.0 Cameo/Optima Power Requirements
Sundance hot tubs are designed to provide optimum performance and
flexibility of use when connected to their maximum electrical service.
However, they are shipped factory configured for their most common
preferred electrical connection as follows:
• All North American 60 Hz Models: 240 VAC/50A **
If you prefer, a qualified technician can perform a minor circuit board
modification that allows the hot tub to operate on a different electrical
service (see table below).
North American 60 Hz Cameo/Optima
240V/40A* 240V/50A** 240V/60A***
Voltage 240 VAC 240 VAC 240 VAC
Max. Current Draw 26A 40A 48A
Number of Wires 3 3 3
Circuit Breaker (2-Pole) 40A* 50A** 60A***
* In this configuration, the heater will not operate while either jets pump
is running or when the blower is running.
** In this configuration, the heater will not operate while both jet pumps
are running.
*** In this configuration the heater will operate while both jets pumps and
the blower are running.