3 intelli-sound radio operation – Sundance Spas 880 User Manual
Page 68
Page 62
880 SERIES
VOL up/down button (3) to
choose desired setting, then
press and hold the BAND
button (8) for 2 seconds to
confirm selection.
Note: Unit returns to volume
mode if volume control is not
operated for 3 seconds.
13. Open/Close
Front Panel
Press firmly on the release
button (15), then open front
panel (16) by gently lifting
upward on bottom edge.
To close front panel, gently
flip panel down, then press
firmly on panel directly above
release button (15) until you hear an audible “click.” Keep front
panel closed at all the times to prevent water intrusion, except when
changing discs.
CAUTION: Never insert wet discs into unit or CD player
will be damage!
22.3 Intelli-Sound Radio Operation
1 Radio Operation.
Press MODE button (4) to select Radio mode. Station frequency is
indicated on display.
•
To Select Band: press BAND button (8) repeatedly to scroll
through radio mode as follows: FM1 --> FM2 --> FM3 -->
AM1 --> AM2 -->FM1. Each radio band stores up to 6
independent stations, for a total of 18 FM and 12 AM presets.
•
To Program Station Presets in Radio mode: Press and hold
SH button (5) until display reads “SHIFT”. Press and hold the
Tune Up/Down button (2) for 2 seconds, then repeatedly
press to select preset 1 to 6. At desired preset, press the ENT
button (5) to store current frequency into selected preset.
Note: When power to spa is shut off for any reason, all station presets
are reset.
2
5
6
8
7
4
9
3
12
11
10
13
14
15
1
16
17