Sundance Spas 880 - Manual (Page 51)

Page 45
880 SERIES
13.3 Cleaning The Hot Tub Interior
To preserve the sheen of your hot tub’s surface, it is crucial that
you avoid using abrasive cleaners or cleaners which have adverse
chemical effect on the surface. If you are not certain as to the
suitability of a particular cleanser, consult your authorized Sundance
Spas dealer. Regardless of the cleanser used, use extreme care to assure
that no soap residue is left on the surface. This could cause severe sudsing
when the hot tub is refilled.
13.4 Pillow Care
Remove and clean the headrest pillows as needed with soapy water
using a cloth or soft-bristle brush. To maintain water resistance and
luster, apply a quality vinyl conditioner once a month. Always remove
the pillows when adding chemical shock treatment to the spa water.
The pillows can be returned to the spa when the sanitizer reading drops
below 4.0 ppm.
1 2
Place both hands on
pillow with thumbs as
shown. Press inward with
thumbs to curl pillow
lip inward so you can
grab it with fingertips.
3 4
5
Flex pillow lip inward
2-3" to get a good
grip on the ends. Gently pull outward on
pillow to release mounting
stud from receptacle on
spa shell.
Wash pillow(s) in a mild detergent soap and warm water solution. Never machine wash your pillows
or attempt to clean them with a non-approved vinyl cleaning agent!
6 To reinstall pillows: Simply align pillow over mounting stud receptacle, then gently push inward to
snap in place.