6 selecting the desired massage action – Sundance Spas 880 User Manual

Page 34

Page 28

880 SERIES

10.6 Selecting The Desired Massage Action
Your Sundance

hot tub is equipped to allow you to

customize the massage action you desire. Each model
incorporates a massage selector(s) that allows you to
customize the massage and performance by diverting water between
various jet systems. Simply turn massage selector to position A (Combo),
B, or C to divert water pressure to various jet groups.

Note: This valve is designed to operate in positions A (Combo), B, and
C for optimum performance. It is considered normal for sound levels
within the valve to vary between positions due to the large amounts of
water flowing through it. For optimum filtration benefits, leave the valve in
position A when hot tub is covered. Select position B or C for maximum
jet performance during hot tub use.

10.7 Adjusting Fluidix Reflex, Nex, ST And Intelli-Jets
These jets in your new hot tub offer the advantage of no moving parts
and zero maintenance. They can also be adjusted for a high and low
impact massage, providing the ultimate massage!

To Adjust Jets
1. Fluidix Nex/Intelli-Jets and Reflex Jets only: Turn

outer dial (A) clockwise to increase water volume.
Turn outer dial counterclockwise to decrease water
volume or to shut jet off.

2. For a high impact massage, turn corresponding air

control knob clockwise. For the Fluidix ST jet, this

will create a straight water flow. For low impact
massage, turn corresponding air control knob
counterclockwise. For the Fluidix ST jet, this will

create an oscillating flow. Refer to Sections 10.12-
10.17 (pages 31-36) for specific operation details.

The included tool (shown) allows you to position the
jet nozzle angle to your liking. This tool can also be

used to aid in the opening or closing of the nozzle on

Fluidix Reflex jets.

Note: Always keep at least 6 adjustable jets open at all
times on each jet system.

Fluidix Inetlli-Jet Shown

Fluidix Reflex Jet

Fluidix ST Jet