Sundance Spas 880 - Manual (Page 69)

Page 63
880 SERIES
2. Automatically Setting Station Presets
Press and hold the AS/PS button (6) for approximately 2 seconds
until you hear a beep that confirms the memory function is engaged.
The unit will search for six strong stations and automatically store
them on the current band. All 18 FM and 12 AM presets can be set
sequentially by selecting the next band and continuing the operation
during auto programming.
3. Seek/Manual Tune
Press TUN up/down button (2) once to activate manual tuning
mode, then press TUN up or down repeatedly to manually increase
or decrease displayed frequency. Press and hold either TUN up or
down button (2) for at least 2 seconds to activate auto tuning mode.
The unit will automatically search and stop at the next higher or lower
station with sufficient signal strength.
Note: After 3 seconds, seek mode is re-enabled.
4. Preset Scan Function
• Press AS/PS button (6) once to enter scan mode. Each preset
station in the current band will play for 5 seconds while the
preset number is flashes on the display (17). At the desired
station, press AS/PS button (6) a second time.
• Press and hold ENT/SH button (5) until display reads “SHIFT.”
Repeatedly press TUN up or down button (2) to choose preset
1-6, then press ENT/SH button (9) to confirm selection.
22.4 Intelli-Sound CD Player Operation
1. Insert, Play, and Eject a CD
Open front panel (16) by pressing firmly on release button (15)
and lifting panel upward from bottom edge. Gently insert CD into
slot (14) with label facing up. The CD will be drawn inside by the
motorized mechanism. DO NOT FORCE! Close front panel by
folding down, then press firmly on panel directly above release latch
(15) until you hear an audible “click.” Keep front panel closed at all
the times to prevent water intrusion, except when changing discs.
CD playback will automatically begin after CD is loaded.
• To Play CD: Press the MODE button (4) to change to CD mode.
The CD will play. The display shows current track, play
time, and animates a 3-D rotating disc during playback.
• To Remove CD: Open the front panel and press CD eject
button (13). Remove CD from drive and close front panel as