Siemens Simantic Net NCM for Industrial Ethernet S7 - Manual (Page 63)

Installing and Starting the Ethernet CP with STEP 7
63
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
2.2.6 Configuring Communication Services
Setting Up Connections
You must set up connections for the connection-oriented services supported by the
Industrial Ethernet CP, see also the Table in Section 1.2.
S
S7 connections
see the STEP 7 user manual /6/
S ISO transport connections
see Section 4.4
S
ISO-on-TCP connections
see Chapter 4.5.
S
TCP connections
see Section 4.6
S
Connections for UDP
see Section 4.7.
S
Interconnections for PROFInet communication
see manual Component based Automation – configuring plants with SIMATIC
iMap /23/
The information in the STEP 7 user manual /6/ in the chapter “Creating
Communication Connections Between Two Programmable Modules” also applies
to the additional types of connection possible with the CPs.
You will find this information in the online help with integrated in STEP 7 by
selecting Help
" Contents. Select the topic “Configuring Connections and Data
Exchange.