Siemens Simantic Net NCM for Industrial Ethernet S7 - Manual (Page 53)

Installing and Starting the Ethernet CP with STEP 7
53
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
Overview in Table Form
The table view in the Properties dialog of the station provides a detailed overview
of the components used for network attachment.
Follow the steps below:
1. Using the SIMATIC Manager, select the station in your project that you want to
check.
2. Select the Object Properties using the menu option Edit " Object Properties
or by double-clicking the station symbol.
3. Select the “Interfaces” tab.
Result:
Figure 2-4 “Interface” Tab in the “SIMATIC 300/400” Properties Dialog Box
In the displayed dialog, you can see the subnet attachments that were configured
for the SIMATIC station.