Siemens Simantic Net NCM for Industrial Ethernet S7 User Manual

Page 4

SIMATIC NET NCM S7 for Industrial Ethernet

C79000-G8976-C129–06

Prior to Startup

Before putting the product into operation, note the following warning:

Caution

Prior to startup you must observe the instructions in the relevant documentation.
For ordering data of the documentation please refer to the catalogs or contact your
local SIEMENS representative.

We have checked the contents of this manual for agreement with the hard-
ware and software described. Since deviations cannot be precluded entirely,
we cannot guarantee full agreement. However, the data in this manual are
reviewed regularly and any necessary corrections included in subsequent
editions. Suggestions for improvement are welcomed.

Disclaimer of Liability

Copyright

The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration of
a utility model or design, are reserved.

Siemens AG
Automation and Drives
Postfach 4848, D-90327 Nürnberg

Subject to technical change.

Siemens Aktiengesellschaft

G79000–G8976–C129–06