Siemens Simantic Net NCM for Industrial Ethernet S7 User Manual
Page 36
Communication via Ethernet CPs in S7 Stations
36
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
1.7.4
Network/Project Variant: One Subnet – More Than One
(Sub)Project
Configuration of the System
In complex networked systems, during configuration it is sometimes more efficient
to manage plant sections in different (sub) projects.
The situation can arise that communication takes place over an interproject subnet
and that interproject connections must then also be created.
Example:
S7 400/1
S7 – 300/3
System section
“Production 1”
S7 300/1
S7 – 300/2
S7 – 400/2
System section
“Production 2”
Ethernet (1)
Organization in a Multiproject
User-friendly and consistent configuration of such communication is supported in
STEP 7 as of Version V5.2 with the multiproject.
The functions for multiprojects in STEP 7 allow the following:
S
Several projects can be managed in one multiproject and edited separately
S
Projects can be branched and merged
Two different strategies can be distinguished in a multiproject:
S
Several employees work at the same time on a multiproject in a networked
environment. The projects of the multiproject are in different network folders. In
this case, all connection partners are available for configuring connections.
S
One employee manages the multiproject centrally. This person creates the
structures for projects (when necessary locally) and contracts individual projects
out for external editing. The central configuration engineer then returns these
projects to the multiproject and synchronizes the interproject data with system
support and where necessary executes the required interproject functions.
In this case, agreement is necessary, for example, regarding the assignment of
connection names because it will be far easier when synchronizing the projects