Siemens Gigaset SL565 - Manual (Page 50)

49
Handset settings
Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / registr_sett.fm / 11.7.07
¤
Save changes (page 61).
You cannot deactivate the confirmation
tone for placing the handset in the base
station.
Setting the alarm clock
Precondition: The date and time have
already been set (page 8).
Activating/deactivating and setting the
alarm clock
w
¢
ì
¤
Change multiple line input:
Appoint.:
Select On or Off .
Time:
Enter the wake-up time in 4-digit for-
mat.
Occurance :
Select Daily or Monday-Friday .
Volume:
Set the volume (1-6).
Melody:
Select melody.
¤
Save changes (page 61).
You will see the icon ¼.
A wake-up call with the selected ringer
melody (page 45) is signalled on the
handset. The wake up call sounds for
60 seconds. The display shows ì. If no
key is pressed the wake-up call is repeated
twice at five minute intervals and then
switched off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (slumber
mode)
Precondition: A wake-up call is sounding.
§OFF§ Press the display key. The
wake-up call is deactivated.
or
§Snooze§ Press the display key or any
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Setting an appointment
(Calendar)
You can receive reminders for up to 30
appointments from your handset (volume
and melody, see page 45).
Saving appointments
Precondition: The date and time have
already been set (page 8).
w
¢
ç
r/q Select a day in the graphic
calendar and press §OK§ or w.
(Days that already have
appointments stored are high-
lighted in black)
The day's stored appointments are listed.
If you have already saved 30 appoint-
ments, then you must delete an existing
one.
Select and press §OK§ .
¤
Change multiple line input:
Appoint.:
Select On or Off .
Date:
Enter day/month/year in 8-digit format.
Time:
Enter hours/minutes in 4-digit format.
Notes:
Enter the text (max. 16 characters) .
The text appears as the appointment
name in the list and will be displayed
on the screen during the appointment
reminder. If no text is entered, you will
only see the date and time of the
appointment.
Save Press the display key.