Siemens Gigaset SL565 - Manual (Page 41)

40
Using several handsets
Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / registr_sett.fm / 11.7.07
Using several handsets
Registering handsets
You can register up to a total of six hand-
sets to your base station.
A Gigaset SL56 handset can be registered
to up to four base stations.
You must activate manual registration of
the handset at both the handset and the
base station.
After it has registered, the handset returns
to idle status. The internal number of the
handset appears in the display, e.g. INT 1 .
If it does not, repeat the procedure.
On the handset
w
¢
Ð
¢
Handset
¢
Register H/Set
s Select base station, e.g. Base 1
and press §OK§ .
~ Enter the system PIN of the
base station (the default is
0000) and press §OK§ . The
screen will display, e.g. Base 1 .
On the base station
Within 60 secs. press and hold the regis-
tration/paging key on the base station
(page 1) (approx. 3 secs.).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
Press and hold the registration/paging
key on the base station (page 1)
(approx. 3 secs.).
De-registering handsets
You can de-register any registered handset
from any registered Gigaset SL56 handset.
u
Open list of internal users.
The handset you are currently
using is indicated by < .
s Select the internal user you
wish to de-register.
§Options§ Open menu.
De-reg. H/Set No.
Select and press §OK§ .
~ Enter current System PIN and
press §OK§ .
§Yes§ Press the display key.
Locating a handset ("paging")
You can locate your handset using the
base station.
¤
Press the registration/paging key on the
base station briefly.
¤
All handsets will ring at the same time
("paging"), even if the ringers are
switched off.
Ending paging
¤
Briefly press the registration/paging
key on the base station or press the talk
key c on the handset.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception ( Best Base ).
w
¢
Ð
¢
Handset
¢
Select Base
s Select one of the registered
base stations or Best Base and
press §OK§ .