Last number redial list, Manual last number redial, Managing entries in the last number redial list – Siemens Gigaset SL565 User Manual
Page 23
22
Using the directory and lists
Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / direct_charges.fm / 11.7.07
(On the Bluetooth headset:
instead of pressing the head-
set's talk key; it can take up to
5 seconds to establish a con-
nection to the handset)
You will hear a short beep. The display will
prompt you accordingly. Speak the name.
Repeat the name after being prompted to
do so by the display and by a further beep.
In the list you can see
´ next to the
name.
To change a voice pattern, you must
record over it.
Using voice dialling
v Press
and
hold.
Speak the name after the beep. If the
name matches the recorded voice pattern,
it is repeated. The number is dialled.
Playing voice patterns
s
¢
s (select entry with ´ )
Options
Open menu.
Play Pattern
Select and press
§OK§
. The voice
pattern will be played in
handsfree mode.
a Press
and
hold (idle status).
Deleting voice patterns
s
¢
s (select entry with ´)
Options
Open menu.
Delete Pattern
Select and press
§OK§
.
a Press
and
hold (idle status).
The directory entry is retained.
Last number redial list
The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers
is in the directory, then the corresponding
name will be displayed.
Manual last number redial
c
Press the key briefly.
s
Select entry.
c
Press the talk key again. The
number is dialled.
When displaying a name, you can have the
respective phone number displayed by
using the display key
§View§
.
Managing entries in the last number
redial list
c
Press the key briefly.
s
Select entry.
§Options§
Open menu.
The following functions can be selected
with
q:
Automatic Redial
The selected number is automatically
dialled at fixed intervals (at least every
20 seconds). The handsfree key flashes
and "handsfree" is activated.
– Participant answers: press the Talk
key
c. The function is ended.
– Participant does not answer: the call
is terminated after approx.
30 seconds. The function is ended
after pressing any key or ten unsuc-
cessful attempts.
Display Number
(as in the directory,
Delete Entry
(as in the directory, page 19)
Delete List
(as in the directory, page 19)
Please note:
If the memory cannot accommodate a new
voice pattern, a message will appear on the
display. The phone automatically returns to
the directory. Delete a voice pattern and select
Record Pattern
again.