beautypg.com

Troubleshooting, Self diagnosis display – Samsung VP-X110L User Manual

Page 128

background image

ENGLISH

128

128

Troubleshooting

Self Diagnosis Display

If these instructions do not solve your problem, contact your nearest Samsung dealer or authorized service centre/personnel.

The power is not connected properly
The battery is dead
The battery is too cold
The Date/Time is not set
Focus is set to manual mode
Recording was done in a dark place
Lens is covered with condensation
Memory stick is in wrong position
Something fills in the Memory Stick slot

Symptom

Possible Causes

Measure

Connect the AC adapter properly, page 24
Replace the dead battery pack
Warm up the battery or move to warmer place
Set the Date/Time, pages 90~91
Set focus to AUTO
Use strobe or lit the place
Clear the lens and check the focus
Insert the Memory Stick properly, page 34
Clear the Memory Stick slot

Not enough free space for saving files
The file is corrupted
The paper is insufficient.
The paper is caught in the printer.
Ink is low.
The file is wrong.
The error is occurred while transferring data.
Battery is low.
The hold key is locked.
The memory card is corrupted.
Format the memory card.
Failed to write.
Failed to read.
The format is not supported.

Memory Stick is protected to write.
The video file is corrupted.

Not enough free space
Corrupted file
Paper error
Printer error
Ink error
Wrong error
USB transfer error
Low battery
Holding the key
Card error
Not formatted
Write error
Read error
Not supported format

Write protected
MPEG decoding error

Check the space of internal memory or the Memory Stick.
Delete the corrupted file.
Check the paper in the printer. If there is no paper, insert the paper.
Check that paper is caught in the printer. Pull out the caught paper.
Check if the ink or toner is low.
Check that the file is JPEG.
Disconnect the USB cable and connect it again.
Charge the battery pack or connect the AC Adapter.
Unlock the hold key and operate the CAM.
Format the Memory Stick or replace it with new one.
Format the Memory Stick.
Check the memory space or format the memory.
Delete the file.
The AVI or JPEG file that is not supported. Check the supported file
on the page 30.
Unlock the Memory Stick.
Delete the corrupted file.

Informs that…

Action

Display

No power is supplied

Date/Time is wrong

Focus does not adjust automatically

The Memory Stick will not
load properly