Setting up tcp/ip – Siemens 11 User Manual
Page 40
39
Appendix
Gigaset USB Adapter 11 / en / A31008-E105-B102-1-7619 / appendix.fm / 06.12.2002
Setting up TCP/IP
This section contains instructions for configuring the TCP/IP protocol of the Gigaset USB
Adapter 11. The IP address policy depends on your wireless network.
1. On the taskbar, select Start - Settings - Control Panel, double-click the Network
icon.
2. Click the Configuration tab of the Network dialog box.
3. In the network components list, select the TCP/IP protocol of your Gigaset USB
Adapter 11, e.g., Wireless LAN Card, and then click Properties.
4. On the IP Address tab, choose one of the methods as required.
Option A: Click Specify an IP address.
In the IP Address box, enter a valid four-component IP address, either a public or pri-
vate one as required. If a private IP address is used, the following three blocks of IP
addresses are available for private networks:
10.0.0.0 – 10.255.255.255, 172.16.0.0 – 172.31.255.255, 192.168.0.0 –
192.168.255.255
i
For Windows 98, 98 SE and ME you may need the CD containing your
operating system. The operating system data will be required if no net-
work functions have previously been installed on your PC.