Siemens Gigaset 4015 - Manual (Page 64)

60
Appendix
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619 anha.fm 17.09.01
The ringer/dialling
tone cannot be
heard. You have changed
the telephone cord
on your Gigaset. Ensure, when purchasing
a new cord, that it has
the correct pin assign-
men (see page 6).
Error beep is
generated
(descending tone
sequence) Wrong input Repeat the procedure;
note the display and, if
necessary, refer to the
operating instructions.
The answering ma-
chine announces
“PIN is incorrect”
during remote
operation. The system PIN
entered is incorrect. Re-enter the system PIN
(see page 53).
The answering
machine does not
record any mes-
sages, announce-
ments or infotexts Memory is full Delete old messages
Play back and delete
new messages (see
page 36).
An answering
machine message
does not have a
time stamp The date/time not
set Set the date/time (see
page 9).
Fault Possible cause Solution