Siemens Gigaset 4015 - Manual (Page 12)

8
Preparing the telephone
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619 vorberei.fm 17.09.01
Attaching the belt clip
Push the belt clip onto the back of the handset until the side protru-
sions click into place.
Activating/deactivating handset
To activate/deactivate, hold down the end call key – You will hear the
confirmation
beep*.
Activating/deactivating keypad protection
You can disable the handset keys when carrying the unit in your pocket
or bag. This protects the keypad against inadvertent activation.
If there is an incoming call, the key lock is automatically deactivated
and re-activated after the call has ended.
Accepting a call: Press the talk key
.
4
To activate/deactivate, hold down key – you will hear the confirma-
tion beep
* .
Œ
● Once the initial charging operation is completed you can
replace your handset into the base station after each call.
Charging is controlled electronically. This ensures optimum
charging and prolongs battery life.
● The batteries heat up during charging. This is normal and not
dangerous.
● The battery charging status is correctly displayed only after
uninterrupted charging/discharging. You should therefore
avoid opening the battery compartment unnecessarily.
Œ
The handset is activated as soon as you insert the batteries and
place the handset in the base station.
* Confirmation beep = rising tone sequence,
Error beep = falling tone sequence.