Siemens Gigaset 4015 - Manual (Page 47)

43
Press keys:
Registering and de-registering handsets
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619 mobilt_an.fm 17.09.01
Registering Gigaset 2000/3000 handsets
and non-Siemens handsets at the
Gigaset 4010/4015 base station
Prerequisite:
The non-Siemens handsets must also comply with the
GAP standard
!
However, it is possible that not all functions will be
available on your handset!
Step 1:
Register your handset according to the operating
instructions of the relevant handset.
After registration, your Siemens base station assigns
the first unassigned internal number to the handset.
Step 2:
Press the key on the underside of the base station
briefly
A signal tone is generated at the base station.
De-registering handsets
Prerequisite:
You can only de-register handsets with a Gigaset 4000.
OOOOOOO Press the display key.
OOOOOOO OOOOOOO Select the handset to be de-registered.
OOOOOOOOOOOO
MENU Open the menu.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
DE-REG H/SET Select the menu item and confirm is
displayed.
OOOOOOO Enter the 4-digit system PIN (factory setting: 0000) and
confirm.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
DE-REGISTER? Confirm the prompt.
GAP G eneric Access Profile = European
standard for the interaction of hand-
sets and base stations
PIN ****