Siemens Gigaset 4015 - Manual (Page 61)

57
Press keys:
Connecting the base station to a PABX
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619 anlagen.fm 17.09.01
Connecting the base station to
a PABX
Dialling mode and flash time
Step 1: Changing the dialling mode
It is necessary to change the dialling mode only if your
PABX does not operate with the preset tone dialling
(
DTMF - dual-tone multifrequency. Please refer to the
operating instructions of your PABX.
Options:
– Tone dialling (DTMF),
– Dial pulsing (DP). (country-specific)
– DTMF-Earth
*
OOOOOOOOOOOO
MENU Open the menu.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
BASE SET Select the menu item and confirm.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
ADD FEATURES Select the menu item and confirm.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
DIAL MODE Confirm.
OOOOOOO OOOOOOO
Select the required dialling mode and confirm.
Step 2: Setting the flash time:
Prerequisite:
Your PABX requires a flash time different to the preset
flash time, Please refer to the operating instruc-
tions of your PABX
.
OOOOOOOOOOOO
MENU Open the menu.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
BASE SET Select the menu item and confirm.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
ADD FEATURES Select the menu item and confirm.
OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOO
TBR Select the menu item and confirm.
OOOOOOO OOOOOOO
Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
600 ms.
* country-specific
Œ
The current setting is marked with
'
.