Siemens Gigaset 4015 - Manual (Page 17)

13
Press keys:
Making calls
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619 telef.fm 17.09.01
Answering a call
Your telephone rings (ringer) and the status LED flash-
es.
Press the talk key
or
G@
Simply remove the handset from the base station
(factory setting: Auto talk, see page 52).
Displaying telephone numbers (CLIP)
The network provider must support the calling line
identification (CLIP) and the telephone number must
have been transmitted. Contact your network provider.
An incoming call is displayed as follows (example):
If the number received is saved in the handset directo-
ry, the stored name is displayed (example:
).
If the telephone number or the name is not displayed,
you see:
Œ
● If the ringer is disturbing you: Open the
menu via
and select .
● As long as the call is displayed, you can
accept it by pressing the talk key
for
example.
● Setting the handset volume (while you are
talking, see page 51).
If you have not requested CLIP.
If the caller has not requested the tel-
ephone number transmission or if
display of the number was deliber-
ately suppressed by the caller (CLIR)
CLIP Calling Line Identification Presentation =
Displaying the caller's telephone number
CLIR Calling Line Identification Restriction = display
of the incoming telephone number
suppressed.
MENU SILENT
Telephone
number
1
&
ANNE
UNAVAILABLE