Siemens Gigaset 4015 - Manual (Page 11)

7
Preparing the telephone
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619 vorberei.fm 17.09.01
Operating the handset
Inserting the batteries
● Insert the batteries ensuring correct polarity – see figure on left.
● Replace cover and push gently upward until it clicks into place.
● To open, press the grooved area on the cover and slide back.
Placing the handset into the base station and charging the
batteries
Before activating your handset, place it in the base station with the
display facing upward. After approx. one minute the handsets’ internal
number is displayed in the upper left corner (e.g. “1”).
Leave the handset for approx. five hours in the base station to charge
the batteries. The charging status icon flashes on the handset indicat-
ing that the batteries are being charged:
Note:
Your Gigaset is now ready for operation. Your answering machine is set
with a standard announcement. Please set date and the time (see
page 9), so that the time of incoming calls can be noted correctly.
The display is protected by a plastic film.
Remove the protective plastic film!
Œ
● Only insert the recommended rechargeable batteries (see
page 63). Never use ordinary (non-rechargeable) batteries or
health risks and personal injuries cannot be excluded.
● Never use non-Siemens charging units as these can damage
the batteries.
Œ
For information on how to register further handsets (bought
additionally), see page 41.
µ Batt. empty (symbol flashes) œ Batt. 2 /
3
charged
 Batteries 1 /
3
charged › Batt. fully charged
+
– +
–
+
–
G
5 h