0 gps waas smart receiver specifications, Smart, gps waas – Standard Horizon CP500 User Manual
Page 83
CP500
Page 85
18.0 GPS WAAS SMART RECEIVER SPECIFICATIONS
This GPS WAAS Smart Receiver is based on a ultimate GPS engine that delivers accuracy
better than three meters by decoding the GPS correction signals from the satellite-based
WAAS (Wide Area Augmentation System). The GPS engine, interface electronics and the
passive antenna are enclosed inside the water-proof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.
Physical Characteristics
Color
Ivory white
Dimensions
97mm in diameter x 32mm in height (flush mounted) or 61,5mm on flag-pole mount
Weight (without cable)
0,35 lb (160 g)
Cable
white 15 meter 8x28AWG cable with 6 pins female connector
Electrical Characteristics
Input Voltage
10 Vdc to 35 Vdc unregulated
Input Current
0.8 Wmax
GPS Receiver Sensivity
-143 dBm (typical)
GPS Performance
Receiver
WAAS (North America), EGNOS (Europe), MSAS (Asia)
Geodetic Datum
WGS84
Channels
16
Frequency
1575.42MHz (L1, C/A code)
Acquisition Time
Reacquisition
< 1 second
Hot Start
< 3.5 seconds
Warm Start
< 33 seconds
Cold Start
< 40 seconds
Accuracy
GPS
< 2.5m
DGPS
< 2.0m
NMEA Output
Messages
GGA, RMC, GSA, GSV, TXT