Standard Horizon CP500 - Manual (Page 55)

CP500 Page 57
4. Press [CLR] or move the ShuttlePoint knob to the right until the selected page (Chart,
Navigation, Highway or NMEA Data Page) is shown.
10.1.0 Resetting the Trip Log
Select the page with TRIP LOG in one of the data windows as setup in the “Using the TRIP
LOG” section.
1. Press and hold [MENU] and press [ENT], move the ShuttlePoint knob to highlight TRIP
LOG.
2. Press [ENT] to show a popup window, select RESET and press [ENT].
3. A Warning popup window will be shown to confirm if you want to reset the Trip Log. Using
the ShuttlePoint knob select YES and press [ENT]. The Trip Log is now reset.