Sun Microsystems Ethernet PCI-X Adapter - Manual (Page 71)

Appendix D Installing the Sun 10-Gigabit Ethernet Device Driver on Linux Platforms 55
7. Verify that the driver is loaded.
In the following example, the ixge driver is shown in bold italic . On your
system the driver will be indistinguishable from the other modules.
8. Run the dmesg command to see which devices the ixge driver was mapped to:
9. Add the ixge interfaces to the /etc/modules.conf file.
# lsmod
Module Size Used by Not tainted
ixge 53592 0 (unused)
ide-cd 36616 0 (autoclean)
ipv6 285176 -1 (autoclean)
key 78344 0 (autoclean) [ipv6]
st 31380 0 (autoclean) (unused)
sr_mod 16812 0 (autoclean) (unused)
cdrom 34664 0 (autoclean) [ide-cd sr_mod]
sg 40384 0 (autoclean)
joydev 7136 0 (unused)
evdev 6496 0 (unused)
input 7488 0 [joydev evdev]
usb-ohci 23728 0 (unused)
usbcore 87648 1 [usb-ohci]
bcm5700 194456 1
lvm-mod 81248 0 (autoclean)
reiserfs 248344 1
mptscsih 44144 2
mptbase 46400 3 [mptscsih]
sd_mod 16192 4
scsi_mod 133028 5 [st sr_mod sg mptscsih sd_mod]
# dmesg
10-Gigabit Ethernet Adapter Driver - version 1.0.100.3
Copyright (c) 1999-2005 Intel Corp., Sun Corp.
divert: allocating divert_blk for eth2
eth2: Sun 10-Gigabit Ethernet Adapter Driver
alias eth2 ixge
alias eth3 ixge