Table c-1 – Sun Microsystems Ethernet PCI-X Adapter User Manual

Page 66

Sun 10-Gigabit Ethernet PCI-X Adapter Installation and User’s Guide • December 2005

■

If your system is not running Volume Manager, mount the CD-ROM as follows:

You will see the following files and directories in the

/cdrom/sun_10-gigabit_ethernet_driver

directory or the

/cdrom/cdrom0

directory, depending on how you mounted the CD-ROM.

Note –

If you intend to use VLAN, you must install VLAN packages when you

install the software packages.

3. To use the optional VLAN Utility with the 10-Gigabit Ethernet driver on the

Solaris 9 Operating System, verify the proper patch revision using the following
command:

If the patch version is less then 114600-04, update the VLAN Utility software by
installing the 114600-04 patch.

# mkdir /cdrom

# mkdir /cdrom/cdrom0

# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0

TABLE C-1

Files and Directories on the CD-ROM

File or Directory

Contents

U.S. copyright file

FR_Copyright

French copyright file

10_GigabitEthernet/Linux/SRPM/

Contains the Sun 10-Gigabit Ethernet software source
rpm applicable to Linux operating systems:
• sun-10-gigabit-kernel-1.0.version-1.src.rpm

10_GigabitEthernet/Solaris_OS-VER

/ARCH/Packages/

Contains the Sun 10-Gigabit Ethernet software packages
applicable to SPARC architecture software:
• SUNWixgea—adb macros
• SUNWixged.u—adapter driver
• SUNWixgedu—adapter driver header files

The optional VLAN packages:
• SUNWvld—VLAN utility routines
• SUNWvldx—VLAN utility routines (64-bit, s9)
• SUNWvldu—VLAN utility headers

# showrev -p | grep 114600