Sun Microsystems Ethernet PCI-X Adapter - Manual (Page 67)

Appendix C Installing the Software Manually 51
4. Install the patch:
5. Check to see if vlan drivers are installed on the system:
■ If you are using a Solaris SPARC system:
■ If you do not see the previous output, the VLAN Utility software is not installed
on your system. You may install the optional VLAN packages if desired in the
following step.
■ If you do see the previous output, do not reinstall the VLAN Utility software.
Select only the Sun 10 Gigabit Ethernet Driver packages.
6. Install the software packages by typing the following at the command line,
replacing the OS_VER with your version of the Solaris operating system:
■ If your system is running Solaris 9 or 10 software type the following:
where OS_VER is 9 or 10 and ARCH is sparc.
For example, if your system is running the Solaris 9 SPARC operating system, you
would type the following:
# patchadd 10_GigabitEthernet/Solaris_9/sparc/Patches/114600-04
# /usr/bin/pkginfo SUNWvld SUNWvldx
system SUNWvld Sun Ethernet Vlan Utility Routines
system SUNWvldx Sun Ethernet Vlan Utility Routines (64-bit)
# /usr/sbin/pkgadd -d
/cdrom/cdrom0/10_GigabitEthernet/Solaris_ OS_VER / ARCH /Packages/
# /usr/sbin/pkgadd -d
/cdrom/cdrom0/10_GigabitEthernet/Solaris_9/sparc/Packages/