Sun Microsystems Ethernet PCI-X Adapter - Manual (Page 36)

20 Sun 10-Gigabit Ethernet PCI-X Adapter Installation and User’s Guide • December 2005
10-Gigabit Ethernet Driver Parameter Values and
Definitions
TABLE 3-1 describes the parameters and settings for the ixge device driver.
Flow Control Parameters
The ixge device sources (transmits) and terminates (receives) pause frames
conforming to the IEEE 802.3x Frame Based Link Level Flow Control Protocol. In
response to received flow control frames, the
ixge device can slow down its
transmit rate. The ixge device is capable of sourcing flow control frames by
requesting the link partner to slow down, provided that the link partner supports
this feature. By default, the driver advertises both transmit and receive pause
capability during autonegotiation.
TABLE 3-1 ixge Driver Parameter, Status, and Descriptions
Parameter Status Description
instance Read and write Device instance
adv-asmpause-cap Read and write Flow control parameter
adv-pause-cap Read and write Flow control parameter
rx-intr-pkts Read and write Receive interrupt blanking values
rx-intr-time Read and write Receive interrupt blanking values
accept-jumbo Read and write Enable jumbo frames