Sun Microsystems Ethernet PCI-X Adapter - Manual (Page 30)

14 Sun 10-Gigabit Ethernet PCI-X Adapter Installation and User’s Guide • December 2005
5. Reboot the system to load the driver:
6. Verify the installation to ensure that the driver installed and loaded properly.
Verifying the Software Installation
Unless you have the latest version of the driver software installed, the green LEDs
on the adapter will not go on. Be sure that you have version 1.30 or later installed.
● Use the modinfo command to verify that you have the current driver (v1.30 or
later) installed.
If you type grep IXGE , using uppercase letters, you will get only the specific driver
information:
Installation completed.
10-Gigabit Ethernet Driver packages have been installed.
Optional VLAN Utility has been updated using 114600-04. It
may be necessary to reboot the system to reload the updated
driver.
A log of this Install can be found at:
/var/tmp/10_Gigabit.install.2004.12.10.1029
# reboot -r
# modinfo | grep IXGE
267 1331c11 11e0e 271 1 ixge (IXGE 10Gb Ethernet Driver v1.30)
CODE EXAMPLE 2-1 Typical Install Script Output (Continued)