Sun Microsystems Ethernet PCI-X Adapter User Manual

Page 28

Sun 10-Gigabit Ethernet PCI-X Adapter Installation and User’s Guide • December 2005

■

If your system is running Sun Enterprise Volume Manager™, it should
automatically mount the CD-ROM to the

/cdrom/cdrom0

directory.

■

If your system is not running Sun Enterprise Volume Manager, mount the CD-
ROM as follows:

Note –

If you are installing the software from the download site, follow the online

download instructions.

3. Change to the directory were the installation script resides:

where:

■

media-path =

/cdrom/cdrom0

, if you are installing from the CD-ROM.

■

unzipped 10-Gigabit-path/

Sun_10-Gigabit_Ethernet_Driver

, if you

downloaded the driver from the Sun download center.

4. Execute the installation script:

Note –

After the installation script runs, you see a summary of the software package

or patch that was installed. You can also find a log of the installation in

/var/tmp

The log file information is displayed when the installation completes unless the
software meets or exceeds the required package or patch level.

You’ll see the following output

# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0

# cd /

media-path

# ./install

CODE EXAMPLE 2-1

Typical Install Script Output

# ./install

10-Gigabit Ethernet Adapter Driver for sparc Installation.

Use is subject to license terms.