Siemens Gigaset SL100 - Manual (Page 75)

74
Connecting the base station to a PABX
Gigaset SL100 colour / IM_eng / A31008-M1571-R221-2-7619 / pabx.fm / 04.11.05
Connecting the base station to a PABX
The following settings are only needed when your PABX requires them, please refer to
the operating instructions for your PABX.
Dialling modes and and recall
The current setting is indicated by ‰.
1. Step 2: Changing the dialling mode
The following dialling modes can be set:
◆ Tone dialling (DTMF),
◆ Dial pulsing (DP).
v ¢ í ¢
Add. Features
¢
Dialling Mode
2. Step 2: Setting the recall
v ¢ í ¢
Add. Features
¢
Recall
Storing the access code (outside line code)
Precondition: Your PABX requires you to enter an access code before the telephone
number when making an external call, e. g. "0".
v ¢ í ¢
Add. Features
¢
Access Code
The access code will be automatically inserted before any of the numbers chosen from
the calls list.
If you have stored an access code, the following will apply:
◆ For emergency numbers, SMS service centre numbers and dialling from the calls list
the access code is inserted automatically.
◆ For telephone numbers from the directory or network access list, you have to add
the access code yourself.
i You cannot send or receive text messages on PABXs that do not support
Calling Line Identification.
s
Select and confirm a dialling mode (highlighted
with ‰).
a
Long press (back to idle status).
OK
s
Select and confirm recall (highlighted with ‰).
a
Long press (back to idle status).
OK
~
Enter or change the access code (maximum 3 digits)
and press the display key.
Save Entry Confirm. The entry is stored.
a
Long press (back to idle status).
à
OK