Siemens Gigaset SL100 - Manual (Page 65)

54
Registering and de-registering handsets
Gigaset SL100 colour / IM_eng / A31008-M1571-R221-2-7619 / registration.fm / 04.11.05
Registering and de-registering handsets
You can register up to six handsets on your base station.
An SL1 colour handset can be registered on up to four base stations.
Manual registration: Gigaset SL1 colour to Gigaset SL100 colour
You have to initiate handset registration on the handset and on the base station.
1. On the handset
v ¢ ì ¢
Register H/Set
Base 1 flashes in the display when the system PIN has been entered.
2. On the base station
The base station search is cancelled after 60 seconds. If registration has not completed
inside this time, repeat the process.
After successful registration, the handset will be assigned the lowest free number.
Manual registration:
Gigaset 1000 to 4000 and other handsets with GAP functionality
This section describes how to connect handsets belonging to the Gigaset families, hand-
sets A 2, C 1, S1 colour or handsets of other devices with GAP functionality to your
Gigaset SL100 colour.
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base station
The next unassigned internal number (1-6) is automatically assigned to the handset as
it is registered. If all the numbers have been assigned, number 6 is overwritten provided
the handset is in idle status.
s
Base 1 Select base station (1–4) and confirm, e.g. Base 1.
~
Enter the system PIN (the factory setting: 0000) and
confirm.
OK
OK
÷ Press the registration/paging key on the base station
for 3 seconds. Registration is initiated.
÷ Press the registration/paging key on the base station
for 3 seconds. Registration is initiated.