Siemens Gigaset SL100 - Manual (Page 54)

53
SMS (Text Messages)
Gigaset SL100 colour / IM_eng / A31008-M1571-R221-2-7619 / sms_neutral_Woody.fm / 04.11.05
Self-help with error messages
Error Message Possible Cause Remedy
You cannot send messages. You have not requested the
CLIP service (Calling Line
Identification Presentation).
Ask for this service to be
enabled.
Message transfer was inter-
rupted (e.g. by a call).
Re-send the message.
No number or an invalid
number is entered for the SMS
centre activated as the send
centre.
Enter the telephone number.
You receive a message whose
text is incomplete.
Your phone's memory is full.
The provider has not yet sent
the rest of the message.
Delete some old messages
(page 44).
You have stopped receiving
messages.
You have changed the ID of
your mailbox.
Tell your SMS contacts your
new ID or undo the change
(page 49).
You receive no messages. You have not activated your
mailbox.
Activate your mailbox
(page 49).
The message is played back. The "display call number" serv-
ice is not activated.
Ask your network provider to
activate this service (there is a
charge for this).
Your terminal is stored in the
database of your SMS provider
as having no fixed network
SMS functionality, i.e. you are
no longer registered in it.
Register the terminal (again)
for SMS reception.
Messages are only received
during the day.
If your SMS network provider's
database does not yet know
that your terminal supports
fixed network SMS functional-
ity, then it will only attempt to
deliver messages during the
day.
Register the terminal (again)
for SMS reception to get it re-
assigned in the database.