Siemens Gigaset SL100 - Manual (Page 64)

73
Setting the base station
Gigaset SL100 colour / IM_eng / A31008-M1571-R221-2-7619 / settings_bs_hs.fm / 04.11.05
Repeater support
With a repeater you can increase the range and reception strength of your base station;
the repeater has to be registered. To use the repeater you first have to activate the
repeater mode. This will cancel any calls that are in progress.
v ¢ í ¢
Add. Features
Restoring the base station to factory settings
Resetting does not affect the system PIN and handsets are still registered.
v ¢ í ¢
Base Reset
Factory settings of the base station
s
Repeater Mode
Select the menu item and confirm.
[RRRRRRRRRRRRRRRRRRRRR] Yes
Press the display key to confirm the prompt.
OK
~
Enter the system PIN (factory setting: 0000) and con-
firm.
[RRRRRRRRRRRRRRRRRRRRR] Yes
Press the display key to confirm the prompt.
OK
Name of the handsets "INT 1" to "INT 6" page 56
Internal listening in deactivated page 58
Network provider preselection preset according to country page 32
send centre country specific page 35
SMS incoming and draft messages list empty page 44
and
page 36
SMS message/message number deactivated/deleted page 49/
page 50
List type missed calls page 30
Access code none page 74
pause after access code 3 s page 75
Pause after recall key 800 ms page 75
Pause after line seizure 3 s page 75
Recall 250 ms page 74
Dialling mode DTMF page 74