Changing a handset's internal number, Transferring a call to another handset, Internal enquiry calls – Siemens Gigaset SL100 User Manual

Page 68

Using several handsets

Gigaset SL100 colour / IM_eng / A31008-M1571-R221-2-7619 / registration.fm / 04.11.05

Changing a handset's internal number

A handset is automatically assigned the lowest unassigned number when it is regis-

tered. You can change the internal number of all registered handsets (1–6).

Transferring a call to another handset

You can transfer (connect) an external call to another handset.

Internal enquiry calls

You can call an internal user (e.g. to consult with him or her) while speaking with an

external caller. You are automatically reconnected to the external user when you end

this internal call.

Open list of handsets

Open the menu.

Edit H/Set No.

Confirm. The list of handsets is displayed.

s ~

The current number flashes. Select the handset,

enter the new internal number (1–6) and confirm.

The handset's old number is overwritten.

[RRRRRRRRRRRRRRRRRRRRR]

Save

Now press the display key to confirm the entry.

Long press (back to idle status).

You will hear the error tone if you assign an internal number twice (a fall-

ing tone sequence). Repeat the process with an unused number.

Open list of handsets.
The external caller hears the wait melody.

Select the handset or Call All and confirm. When the

internal user answers, announce the external call.

Press the end call key. The external call is transferred

to the other handset.

Instead of announcing the call you can also press the "end call" key

immediately. If the internal user does not answer or is busy, the call will

come back to you automatically (Recall appears in the display).

Open list of handsets.
The external caller hears the wait melody.

Select the handset and confirm.
Ending a enquiry call:

[RRRRRRRRRRRRRRRRRRRRR]

End

Press the display key. You are reconnected to the

external caller.