Loading a new ringer tone, Text messages to a pabx – Siemens Gigaset SL100 User Manual
Page 52
51
SMS (Text Messages)
Gigaset SL100 colour / IM_eng / A31008-M1571-R221-2-7619 / sms_neutral_Woody.fm / 04.11.05
Loading a new ringer tone
You will now see You have new messages
Û in the display.
If you do not like the melody, after
Install
press
No
. The loading process will be termi-
nated.
Text messages
to a PABX
You can only receive a text message when the Calling Line Identification is for-
warded to the extension of the PABX (CLIP).
The CLIP of the number of the SMS centre is evaluated in the Gigaset (telephone).
If your phone is connected to a PABX, you may have to prefix the number of the SMS
centre with an access code (this depends on your PABX). You can store the access code
in your base station (page 74).
If in doubt, you can test your PABX by sending a text message to your own number and
putting the access code before the number of the SMS centre. If you do not receive the
message, send another one, this time without the access code.
When you send messages, your sender number may be sent without your extension
number. The recipient cannot reply to you directly in this case.
Text messages can only be sent and received through ISDN exchanges with the MSN
number assigned to your base station.
f
Press the key to open the incoming messages list
(page 43). The first new SMS is now displayed.
s
Scroll to another text message if necessary.
[RRRRRRRRRRRRRRRRRRRRR]
Read
Press the display key. You can tell from the title or
icon that you have been sent data for loading the
melody you selected. You will hear the new melody.
If you like the melody:
[RRRRRRRRRRRRRRRRRRRRR]
Install
Press the display key to start the loading process.
[RRRRRRRRRRRRRRRRRRRRR]
Yes
Press the display key to load the new melody.
r
Select the number of the old ringer melody you want
to replace with the new one. As a precaution you will
hear the old ringer melody.
Confirm.
OK
i
◆
After loading, the melody will remain in the incoming SMS list until
you delete it by pressing the display key
Delete
◆
You can also load the melody from other handsets registered at the
same base station.
◆
How to open a melody sent as an SMS attachment is explained on