Sony Qualia 006 - Manual (Page 50)

Setting Up the SXRD Projection TV
48
SXRD
2-584-141-12(1)
DVD Player with
Component
Video Connectors Use this hookup if:
❑ Your DVD player has component (Y, P
B
, P
R
) jacks.
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the DVD player’s Y, P
B
and P
R
jacks to the SXRD projection TV’s Y, P
B
and P
R
jacks. Use the HD/
DVD IN 4 or 5 input.
2
Using an audio cable, connect the DVD player’s AUDIO OUT jacks to
the SXRD projection TV’s AUDIO IN jacks. Be sure to use the same
row of inputs that you used for the video connection (HD/DVD IN 4 or
5).
✍
The Y, P
B
and P
R
jacks on your DVD player are sometimes labeled Y,
C
B
and C
R
, or Y, B-Y and R-Y. If so, connect the cables to like colors.
Component video cable
Rear of SXRD projection TV
Audio cable
DVD player
AUDIO-R
AUDIO-L
Y
P B
P R
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
✍
To take advantage of the Wide Mode feature, set the DVD player’s
aspect ratio to 16:9. For details, refer to the operating instructions
supplied with your DVD player.