Sony Qualia 006 - Manual (Page 18)

Introducing the Sony SXRD Projection TV
16
SXRD
2-584-141-12(1)
Enjoying Your SXRD Projection TV
Indicators
The indicators show the current status of your SXRD projection TV.
Screen
To minimize reflection, the screen’s surface has a special coating. Read the
instructions “Cleaning the Screen Surface” on page 17 carefully before
cleaning. Inappropriate cleaning methods could damage the screen’s finish.
Detachable speakers (left/right)
The left and right speakers output audio signal. The speakers are packed
separately in the packing box. For details on how to attach the speakers to
the TV, see page 18.
Projection lamp
Your SXRD projection TV uses a projection lamp as its light source. The
projection lamp is located under the Front Panel Cover as noted in the
diagram above. Note the following:
❑ The SXRD projection TV cools down its projection lamp when the
power is turned off. It takes up to two minutes for the picture to come
back after the TV is turned on again. The POWER/STANDBY LED
blinks in green while the picture is coming up.
❑ When the projection lamp wears out, the screen goes dark. Replace the
lamp with a new Sony XL-5000 replacement lamp (not supplied).
✍
After replacing the lamp, be sure to attach the lamp cover securely;
otherwise, your SXRD projection TV will not turn on. For details on lamp
replacement, see “Replacing the Lamp” on page 20.
✍
The light emitted from the lamp is quite bright when your SXRD
projection TV is in use. To avoid eye discomfort or injury, do not look
into the housing when the power is on.
✍
The projection lamp is a consumable product that wears out after use for
a certain period of time. When the lamp wears out, replace it with a new
one so that you can enjoy the original quality of the SXRD picture again.
POWER STD/DUO
Screen
Projection lamp under the panel
Indicators
Right
speaker Left
speaker