Audio, Channels – Sony Qualia 006 User Manual
Page 136
Other Information
134
SXRD
2-584-141-12(1)
Audio
Channels
Problem
Possible Remedies
Good picture, no sound
❏
Press
MUTING
so that
Muting
disappears from the screen (see page 62).
❏
Make sure the
Speaker
option is set to
On
in the Audio menu (see page 113).
❏
Make sure the
MTS
option is set to
Stereo
or
Mono
❏
Make sure the speakers are connected correctly (see page 18).
❏
When the HDMI IN input is in use, surround sound, such as AC-3 and DTS,
cannot be input. Change the sound setting for the external input device to Linear
PCM.
Audio noise
❏
Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the SXRD projection TV. Please use
headphones other than infrared cordless headphones. Also, if you use infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the SXRD projection TV until the noise is
eliminated, or move the transmitter and receiver of the infrared communication
equipment closer together.
Cannot gain enough volume
when using a cable box
❏
Increase the volume of the cable box using the cable box’s remote control. Then
press
FUNCTION
repeatedly until the SXRD projection TV indicator lights up
and adjust the SXRD projection TV’s volume.
Sound seems weak or
insufficient
❏
The SXRD projection TV’s audio might be set to
Auto SAP
or
Mono
, when it
might be better set to
Stereo
. In the Audio menu (see page 113), set the
MTS
setting to
Stereo
. If already set to
Stereo
, switch to
Mono
(which may reduce
background noise during weak stereo broadcasts).
Cannot raise the volume on
external speakers
❏
If the
Speaker
option is set to
Off
and the
Audio Out
option is set to
Fixed
(in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 113). Or, to use the SXRD projection TV remote control, set
the
Audio Out
option to
Variable
.
❏
To turn on the SXRD projection TV speakers, set the
Speaker
option to
On
Cannot switch from Off to On
in the Speaker option
❏
Make sure the speakers are connected correctly (see page 18).
Problem
Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
❏
Press
ANT
to select the VHF/UHF input (see page 62).
❏
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the SXRD projection TV’s memory (see page 116).
TV is fixed to one channel
❏
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the SXRD projection TV’s memory (see page 116).
❏
Check your
Channel Fix
settings (see page 116).
Cannot receive any channels
when using cable TV
❏
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the SXRD projection TV’s memory (see page 116).
❏
Press
ANT
to select the CABLE input (see page 62).