Sony Qualia 006 - Manual (Page 20)

Introducing the Sony SXRD Projection TV
18
SXRD
2-584-141-12(1)
Attaching the
Speakers Your SXRD projection TV comes with detachable speakers. You can enjoy
the TV with or without the included speakers. The speakers are packed
separately in the packing box.
To attach the speakers to your SXRD projection TV, follow the steps below:
1
Hold the left speaker upright. Insert the metal hook located on the top of
the speaker into the slot on the rear of the TV (upper right-hand corner)
and slowly move the speaker closer to the TV.
2
Locate the black pin near the center of the speaker's attachment tab and
the matching hole on the rear of the TV. Insert the pin into the hole until
it locks into place.
✍
Do not carry the SXRD projection TV with the speakers attached. If you
need to move the TV, do so before attaching the speakers.
Slot
Rear of SXRD
projection TV
Metal hook
Screw
Left speaker
Black pin
Rear of SXRD
projection TV
Screw
Screw
Left speaker
Hole