beautypg.com

Sony Qualia 006 User Manual

Page 138

background image

Other Information

136

SXRD

2-584-141-12(1)

TV cabinet creaks

When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.

A slight creaking noise occurs
from the bottom part of the TV

❏ Cinema Black Pro

applies a mechanical iris system. When

Cinema Black Pro

is turned

On

/

Off

, a natural creaking noise occurs due to the basic structure of the

optical unit. The creaking sound is an inherent nature of this system and is not a
defect.

The cooling fan is loud

If the SXRD projection TV is used at high altitudes and

High Altitude

is set to

On

, the cooling fan runs faster and its sound becomes louder. If the TV is not

used at high altitudes, set

High Altitude

to

Off

(see page 123).

The signal from a selected
i.LINK device is not being
displayed

If you have several i.LINK devices connected and operating at once, the TV may
not be able to display the signal from the selected device. Turn the other i.LINK
devices off, and reselect the desired i.LINK device.

If you are using a digital VCR, turn off any Auto LINC functionality of the VCR.
For details, see the digital VCR’s user manual.

The TV does not turn on

The SXRD projection TV cools down its projection lamp when the power is
turned off. It takes up to two minutes for the picture to come back after the TV is
turned on again. Wait for a while until the picture comes back.

Problem

Possible Remedies

This manual is related to the following products: