Sony Qualia 006 - Manual (Page 37)

Setting Up the SXRD Projection TV
35
Se
tting
Up the
SXRD Pr
o
jec
tion T
V
SXRD
2-584-141-12(1)
Cable or Antenna For best results, use one of the following connections if you are
connecting a cable or an antenna and you:
❑
Do not need a cable box to unscramble channels. (If you have a cable
box, see pages 37 and 38.)
❑ Do not intend to connect a VCR. (If you have a VCR, see pages 41 and
42.)
The connection you choose depends on the cable type you have in your
home, as described below.
75-ohm coaxial cable (usually found in newer homes)
Cable Type Connect As Shown
VHF Only or
combined
VHF/UHF
Cable
300-ohm twin lead cable (usually found in older homes)
Cable Type Connect As Shown
VHF Only or
UHF Only or
combined
VHF/UHF
75-ohm coaxial and 300-ohm twin lead cable (found in some homes)
Cable Type Connect As Shown
VHF and UHF
75-ohm coaxial
cable Rear of SXRD
Projection TV
VHF/UHF
75-ohm coaxial
cable
CABLE
Rear of SXRD
Projection TV
Rear of SXRD Projection TV
Antenna connector
(not supplied)
300-ohm twin lead cable
VHF/UHF
Rear of SXRD
Projection TV
75-ohm coaxial cable
VHF/UHF
U/V mixer
(not supplied)
300-ohm twin lead cable