2programs, Storing a program – Savin 4027 User Manual

Page 83

Programs

Programs

You can store frequently used copy
job settings in machine memory and
recall them for future use.

Storing a Program

Note

❒ You can store up to 10 programs.
❒ You can select the standard mode

or program No. 10 as the mode to
be set when modes are cleared or
reset, or immediately after the op-
eration switch is turned on. See
p.93 “Change Initial Mode” .

❒ Paper settings are stored based on

paper size. However, if you have
more than one paper tray contain-
ing same size paper, the tray prior-
itized with User Tools (System
Settings) is selected first. See “Pa-
per Tray Priority” in “Tray Paper
Settings”, General Settings Guide.

❒ Programs are not deleted by turn-

ing the power off or pressing the

{{{{Clear Modes}}}} key. They are can-

celed only when you delete or
overwrite them with another pro-
gram.

AAAA

Edit the copy settings so all func-
tions you want to store in this pro-
gram are selected.

BBBB

Press the

{{{{Program}}}} key.

CCCC

Press [Register].

DDDD

Press the program number you
want to store.

Note

❒ Program numbers displayed

with

m next to them already

have settings.

Reference

p.74 “Changing a stored pro-
gram”

EEEE

Enter the program name using the
letter keys on the display panel.
You can enter up to 40 characters.

Reference

For details about entering char-
acters, see “Entering Text”, Gen-
eral Settings Guide.

Note

❒ If you do not want to enter a

program name, proceed to step

ZLFS310N

RuC3_ENcopy-F_FM.book Page 73 Monday, June 16, 2003 4:57 PM