Savin 4027 - Manual (Page 103)

Settings You Can Change with User Tools
93
4
General Features 2 /
4
❖ ❖ ❖ ❖ Duplex Mode Priority
You can select the type of the Du-
plex function effective when the
power is turned on, or modes
cleared.
Note
❒ Default:
• Metric version: 1 Sided
→1
Sided
• Inch version: 1 Sided
→2 Sided
❖ ❖ ❖ ❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖ ❖ ❖ ❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖ ❖ ❖ ❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effec-
tive when power is turned on, or
modes cleared.
Note
❒ Default: Standard
❖ ❖ ❖ ❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 99.
Note
❒ Default: 99 Sheets.
❖ ❖ ❖ ❖ Tone: Original remains
The beeper (key tone) sounds if
you forget to remove originals af-
ter copying.
Note
❒ Default: ON
❒ If Panel Tone in User Tools (Sys-
tem Settings) is [OFF], the beep-
er does not sound, whatever the
Tone: Original remains setting.
See "Panel Tone" in “General
Features”, Genera l S ettings
Guide.
❖ ❖ ❖ ❖ Job End Call
You can choose to have the beeper
sound when copying is complete.
Note
❒ Default: ON
❒ If Panel Tone of User Tools (Sys-
tem Settings) settings is [ON],
the machine beeps to notify you
that it did not complete a job for
reasons such as: the paper tray
ran out of paper, or a paper jam
occurred.
RuC3_ENcopy-F_FM.book Page 93 Monday, June 16, 2003 4:57 PM